Capability

Steelwork we fabricate every week

Solid mild steel, welded and coated in our Heidelberg workshop at 30 tons a month. Below is what each division covers, what we build to, and how to price it.

Security & perimeter steelwork

Division 01

Security & perimeter steelwork

Gates, bars, cages and enclosures welded from solid steel — built to resist force and to still swing true after years of use. If an item has to keep people or equipment out, it is made here in steel, never aluminium.

Typical scope

  • Sliding gates, single or double leaf, rail or cantilever
  • Swing gates, manual or pre-drilled for a motor later
  • Burglar bars, window guards and door security gates
  • Security cages and lockable storerooms
  • Equipment, generator and gas bottle enclosures
  • Infill in sheet, mesh, bars or palisade

Build standards

  • Frames braced and gusseted at the hanging and locking points
  • Section sizes matched to the opening, not lightened to save cost
  • Primed and top-coated for exterior exposure; galvanising coordinated on request
  • Hinges, locks and drop bolts fitted or supplied to your specification
Send RFQ
Agricultural & farming infrastructure

Division 02

Agricultural & farming infrastructure

Farm steelwork that survives wind, dust and weather — gate systems, chicken house frames, silos, shade structures and crop support built around how the operation actually runs.

Typical scope

  • Custom farm gate systems and kraal frames
  • Chicken house frameworks and feeding infrastructure
  • Storage silos and hopper bins
  • Water tank stands and towers (fabricated and erected)
  • Greenhouse and tunnel frames
  • Shade-net structures and crop-support frames
  • Repairs and extensions to existing structures

Build standards

  • Bracing and anchor detail sized for open-land wind loading
  • Bolt-together sections where a structure must be erected by hand
  • Frames pre-drilled for sheeting, shade cloth or netting
  • Hopper and chute angles set so feed and grain actually flow
Send RFQ
Domestic & commercial additions

Division 03

Domestic & commercial additions

Carports, shade ports, canopies and awnings built to the same standard as our industrial work — clean welds on visible faces, straight lines, and a coating that holds up outside.

Typical scope

  • Custom steel carports and shade port frames
  • Entrance canopies and structural awnings
  • Custom steel framing, supports and light roof structures
  • Batch brackets, base plates and custom hinges
  • Louvre and screen frames
  • Repairs, re-cladding and re-coating of existing steel

Build standards

  • Purlins and fixing points set for your roof sheet or polycarbonate
  • Base plates and anchor layout confirmed before cutting
  • Welds dressed on visible faces before coating
  • Primer plus industrial topcoat in your chosen colour
Send RFQ
Manufacturing overflow & batch work

Division 04

Manufacturing overflow & batch work

When your workshop reaches capacity, or a production run exceeds your press and forming limits, HellerHuizen absorbs the overflow. Repeat components, sub-assemblies and jig work are manufactured to your drawings on a controlled, repeatable process — dimensional accuracy held through the full batch and delivery scheduled to your programme, not ours.

Typical scope

  • Production overflow for contractors and engineering firms
  • Batch cutting, bending and drilling
  • Jig welding and repeat component runs
  • Sub-assembly and kitted delivery
  • Drawing-to-part production from your PDF, DXF or sample
  • Once-off prototype and repair fabrication

Build standards

  • First-off sample approved before the run continues
  • Dimensional checks through the batch, not only at the end
  • Parts marked, bundled and delivered in installation sequence
  • Capacity planned against our monthly tonnage so dates hold
Send RFQ
Fabricated steelwork loaded for delivery from the Heidelberg workshop

Delivery & erection

Where we erect, and where we deliver

Our boundaries are deliberate. We are a small-to-medium fabrication workshop: we erect locally, and we supply and deliver regionally. We do not take on major commercial site erection or heavy structural building installation.

Local erection — our crew

  • Private clients and farmers in Heidelberg and the immediate surrounding areas
  • Small-to-medium site work
  • Gates, burglar bars and security work
  • Carports and water tank towers

Regional — supply-only

  • Clients, contractors and agricultural projects further out
  • Across Gauteng, Mpumalanga and the Free State
  • Fabricated, coated and handed to reliable transport partners
  • Delivered safely to site, marked and in installation sequence
  • Final erection by your own team or a local builder

Common questions

Lead times, delivery and how we price

Straight answers on installation, supply-only arrangements, minimum orders, coating options and how a quote is built.

Do you install steelwork everywhere, or only locally?

We provide full installation services strictly for local clients in Heidelberg and the immediate surrounding areas. For clients further out across Gauteng, Mpumalanga, and the Free State, we operate on a reliable supply-only basis — delivering fully fabricated and coated components kitted and marked for easy installation by your own team or local builder.

Do you do on-site welding or major structural site erection?

No. We are a specialised in-house fabrication workshop. All our cutting, welding, and industrial protective coatings are done under one roof in Heidelberg. We do not take on heavy structural site building or general on-site welding.

What kind of steel and materials do you use?

We use proper structural steel sourced to match the actual load and duty of the item. We do not use cheap, light-gauge imported substitutes on security gates, burglar bars, or structural framework.

What is your standard production capacity and turnaround time?

Our workshop has a steady production capacity of around 30 tons a month. Turnaround times depend on the scale of the order, but every quote specifies a clear timeline so you know exactly when your work will be ready from the Heidelberg floor.

Do you work with aluminium?

No. We focus exclusively on mild steel fabrication — custom security work, structural components, agricultural and domestic steelwork — with in-house industrial coatings.

Do you have a minimum order size?

No minimum order. From a single gate frame, bracket or repair job to a full batch run, the same workshop handles it. Batch and overflow work is priced per part once the first-off is approved.

What coating options can I choose?

Standard finish is a zinc-rich primer with an industrial enamel topcoat in your chosen colour. Hot-dip galvanising can be coordinated on request for harsh outdoor exposure, and primer-only supply is available if you prefer to finish the steel yourself.

How are quotes priced, and what should I send?

Quoting is honest and line-item, based on the steel section sizes the job actually needs, the finish, and the delivery distance. Send a drawing, or a photo and sketch of the opening with dimensions, the quantity, and whether you install or need our crew. Quotes usually go out within one working day.

Do you meet project deadlines?

Yes. Deadlines are planned from the start, not promised at the end - every quote carries a clear delivery date before you commit to the order. Because all cutting, welding and coating happen in our own Heidelberg workshop, we control the schedule instead of waiting on outside suppliers. Capacity is planned against our monthly tonnage before a date is given, and if your programme is tight we tell you up front rather than after the order.

Start a project

Send the dimensions. We'll come back with a price and a date.

No call centre and no sales desk — you deal with the workshop directly. Quotes usually go out within one working day, and if you are still working out what the steelwork should look like, describe the problem and we will propose a detail.

What to send

  • Dimensions or a sketch of the opening, span or platform
  • Quantity, and whether it is a one-off or a batch run
  • Site town, and whether you install or need our crew
  • Finish expectation — primer only, topcoat, or galvanised
  • Your programme date, so we can confirm capacity
WhatsApp Call us