About us

Independent steel fabrication in Heidelberg

HellerHuizen Steel Fabricators is an owner-operated workshop based in Heidelberg, Gauteng. We specialise in custom, in-house steel fabrication and industrial protective coatings for residential, commercial and agricultural clients.

Our story

Built on experience. Driven by hard work.

HELLERHUIZEN Steel Fabricators (Pty) Ltd was founded by Werner Hellerle in Heidelberg, Gauteng, and is backed by 16 years of hands-on steel fabrication experience.

The business grew from humble beginnings — local steelwork, determination, and a commitment to delivering honest workmanship. Through consistency, hard work and standing behind every project, that foundation developed into HELLERHUIZEN Steel Fabricators.

Today we are an owner-operated steel fabrication business built on a straightforward principle: do the job properly, charge fairly, and treat every customer with respect.

We fabricate and coat steel for private clients, farmers, local businesses and contractors in Heidelberg and the surrounding areas. Delivery can be arranged to suit the project, with suitable local on-site steelwork undertaken where applicable.

  • General, custom and structural steel fabrication
  • Gates and security steelwork
  • Mezzanines, platforms and canopies
  • Columns, rafters and brackets
  • Cat ladders, guards and trolleys
  • Industrial protective coating

From smaller custom fabrication to larger fabrication requirements, every enquiry receives personal attention and a commitment to honest workmanship. We believe every customer and every project matters, regardless of size.

16

Years hands-on experience

30

Tons per month

100%

Fabricated in-house

Send RFQ
Caged catladder and steel access platform fabricated by HellerHuizen

Why clients choose us

Straight workmanship, straight answers

Big or small, we focus on clean workmanship, transparent communication and building long-term trust.

Built in-house

From security gates and burglar bars to catladders, staircases, carports and water tank towers, everything is fabricated under our direct supervision.

Proper materials

Steel is sourced to match the load and duty of the job — never cheap, light-gauge substitutes on structural or security work.

Clear service boundaries

Full installation for local clients in Heidelberg and the surrounding areas, and reliable supply-only kitted delivery across Gauteng, Mpumalanga and the Free State.

Galvanised steel structure assembled on site by the HellerHuizen crew

The workshop & crew

One shop, one job card, one person answering for it

Our Heidelberg workshop covers the full job rather than half of it. Steel is cut, sheared, bent, drilled and welded in-house, dry-fitted where the work is multi-part, then coated and checked before it is loaded — so a delivery date stays honest.

  • Cutting, shearing and cropping
  • Bending, roll forming and pressing
  • MIG welding and jig assembly
  • Drilling, punching and tapping
  • Frame squaring and dimensional checks
  • Dry-fit assembly on multi-part work
See our capability

Capacity

Thirty tons a month, planned against your delivery date

30 Tons/Mo

Monthly throughput

Planned capacity for commercial runs, with room for urgent local jobs and small brackets.

One Roof

Fabricate & coat

Cutting, welding, assembly and industrial protective coating, with nothing subcontracted out.

16 Years

Hands-on experience

The same hands-on workshop, growing its monthly tonnage year on year.

Local & Regional

Install & supply

Full erection locally, and supply-only kitted delivery further out.

In-house industrial coatings

Finished here for the environment it lives in

Every item is prepared and coated in our own shop. That protects the steel, keeps the finish consistent, and means one team answers for the whole job — from bare section to loaded delivery.

Surface preparation

Degreasing and abrasion so the coating actually bonds to the steel.

Zinc-rich primer

A protective base coat for exterior and high-wear steelwork.

Industrial enamel topcoat

A durable, colour-matched finish that stands up to sun, dust and weather.

Galvanising on request

Hot-dip galvanising coordinated for the harshest outdoor exposure.

Start a project

Send the dimensions. We'll come back with a price and a date.

No call centre and no sales desk — you deal with the workshop directly. Quotes usually go out within one working day, and if you are still working out what the steelwork should look like, describe the problem and we will propose a detail.

What to send

  • Dimensions or a sketch of the opening, span or platform
  • Quantity, and whether it is a one-off or a batch run
  • Site town, and whether you install or need our crew
  • Finish expectation — primer only, topcoat, or galvanised
  • Your programme date, so we can confirm capacity
WhatsApp Call us